Warmlyyours FeelsWarm® Countertop Heating User Manual

Approx. 72”Thermal Control UnitApprox. 60”Approx. 42”Approx. 24”Heating ElementTransformerTo 120V House OutletFree Design Service • 24/7 Installation

97. INSTALL THERMAL CONTROL UNITThe Thermal Control Unit (TCU) permits the temperature to be adjusted down from the automatic maximum temperature of t

8. SECURE WIRESYour WarmlyYours FeelsWarm® Countertop Heater is supplied with a packet of Velcro patches to secure the wires inside the cabinet. Becau

Thank you for purchasing a WarmlyYours FeelsWarm® Countertop Heater! Please read the following information to learn how to install and operate your co

Package Contents: • Adhesive-backed heating element• Thermal Control Unit• Transformer (with power cord)• Velcro packet• Hole plug• Peel test strip•

Read these instructions completely before starting assembly and installation.1. EVALUATE AND PREPARE THE SURFACE OF THE COUNTERTOPA. Evaluate the low

Preparation1. PROTECTIVE EYEGLASSES ARE REQUIRED.2. Wear gloves and appropriate clothing.3. Cover surface of the work area and the carpet or ooring

Installation Instructions SECTION 252. PERFORM A TEST INSTALLATION OF THE HEATER BEFORE STARTINGA. After the surface is prepared, conduct a prelimina

Installation Instructions SECTION 263. DRILL CABLE HOLE IN CABINETA. Evaluate how the cable from the heater will reach the outlet inside the cabinet.

74. ATTACH THE HEATING ELEMENTA. With the heating element lying on the top of the counter with the white release paper facing up, peel the white rele

5. ACTIVATE PERIMETER ADHESIVEOnce the heating element is attached, the high-bonding adhesive must be fully activated. IMPORTANT: The heater has a pe